nonwoven fabric filler masterbatch white

nonwoven fabric filler masterbatch 1.high additive ratio. 2.better dispersing. 3.competitive prices. 4. ISO9001:2008

nonwoven fabric filler masterbatch

Specification: density: 1.28% cm2whiteness:  ≥ 92.2%Volatile matter:  ≤0.25 %Purity: 88-90%Heat decomposition temperature:  ≥240 °C

Applications: 

Filler masterbatch is used to make transparent packing film, as the transparent package or matt package of sanitation towel,transparent fruit bag,protective film and so on.It slao suitable for the producing of hollow molding bottle and drum which wall thickness less than 1mm.

Recommended addition rates:

The addition rate is 10%-50%,if the film is Multi-layer extrusion,we advice you to add it in the core layer,the effect is better.Optimal addition rate will be confirmed by test.

Packing:  PE heavy-duty bag, 25Kg/bag.

Item	Irregular particles
Exterior	Uniform particles,color and lustre is consistent
Melt Index	≥5.0g/10min
Volatile	≤0.25%
Calcium	≥75%-85%
Strage and transportation ways	Seal,cool,dry,away from direct sunlight

Processing Guide:

 

1. This product will be directly mixed with the plastic raw materials uniformly, which will be used to carry out processing without baking the raw materials;

2. Adding amount is within 1% - 8%, 3% is the generally recommended dosage, which is adjustable according to moisture content of the raw materials.

3. Since the it have a good plasticizing performance and mobile performance, processing temperature can be reduced by 5 % -10 %.

4. The following three steps will be passed when processing: [batching] - [pre-mixing] - [forming]

5. Batching: in accordance with the requirements of plastic parts, choose the batching ratio.

6. Pre-mixing: adding the weighed materials and suitable amount of colorants or master-batch into the mixer, to carry out the simple pre-mixing.

7. Forming: loading the well pre-mixed materials into the plastic jetting-molding machine or the hopper of the extruder, execute injection molding or extrusion.

 

Packaging Store:

 

1. The external packing uses the complex packaging bags, and the internal packing uses the plastic packaging bags;

2. Net weight of per bag: Recycle material package in 5kgs vacuum bags;(25kg per bag)

3. The product should be stored in clean, ventilated, dry, and cool place;

4. Handling carefully, to avoid packaging damaged, to keep out of sun exposure and rain;

5. If the packaging has been damaged or the master-batch has been exposed to moisture, the simple dry treatment can be carried out on the related products, or the plastic dehydration master-batch of our company may be used to solve this problem.(The above data is only reference value, with the constant renewal of products, the technical parameters may change)

 

Notes:

 

1. This product should be keep out of moisture damp before using;

2. The well mixed masterbatch raw materials and plastic must be used up within 10 hours, otherwise, the dehydration master-batch may lose efficiency because of absorbing the moisture in the air, and it is likely to cause the phenomenon of plugging the filter.

3. As for raw materials with large contents of water, the increase of amount is not recommended, because it may reduce the mechanical properties of the products, we recommend appropriate dry treatment;

4. It is no allowed to carry out dry treatment to the raw materials together with the plastic dehydration master- batch;

5. Before using, check packaging to make sure it is intact or not, unused plastic dehydration master-batch should be heat sealed as soon as possible.

 

product application:  non-wovenfabrics

 

 

photo of factory

nonwoven fabric filler masterbatch white