Masterbatch for PP Spunbonded Nonwoven Fabric

Masterbatch for PP Spunbonded Nonwoven Fabric 1.high additive ratio. 2.better dispersing. 3.competitive prices. 4.ISO9001

Masterbatch for PP Spunbonded Nonwoven Fabric

 

Instruction

high quality Calcium Carbonate Filler Masterbatch for PP Spunbonded Nonwoven Fabric.It has excellent compatibility with PP raw materials to reduce melt viscosity and head temperature.Don't block spinneret, easy for spining.With low price and high quality,it's nice for your production cost control.

[Physical Index]

(1)Melt flow index(MFI):26g/10min (2)Whiteness:≥95(3)Density:1.60-1.80g/cm3

(4)Moisture and Volatile:≤0.3%

(5)Particle size:2000mesh(6)Recommended adding riao:10-50%

   

[Features]

1 ,It can add at high percent to make largely cost reduction.

2 ,high MFI and is very easy to compat with PP materials to produce nonwoven fabric;

3 ,it can apply to produce various color by technics;

4 ,It can reduce the influences of aging plastic products,also to make finished fabric to  degradate  easily;

5,It can reduce the adding ratio of cool masterbetch; 

[Application]

Add and mix 10-60% with PP raw materials for production,no effect to production technics.

Introduction of product:

SJ-201 white master batch is to choose rutile titanium dioxide do the main raw material, and the general polyethylene as carrier, add a variety of chemical fertilizer, after high-energy mixed refining into high levels of environmental protection white master batch.

Performance of product :

After the titanium dioxide, carrier and additives mixed, White master batch is produced by the high performance of the double screw extrusion mechanism. It has stable color, good dispersion, and it’s environmental and non-pollution.

Advantage of product:

(1) Environmental protection, non-toxic, tasteless, smokeless, good compatibility

(2) The product's surface is smooth and bright, the color is stable, with the higher tinting strength high dispersion property, etc.

(3) Significantly reduce the cost of finished products.

(4) Direct to join with the raw material and stir well. Easy to use, without any special equipment.

Application scope and Application method :

(1) It is suitable for a high-demanding to the color of the plastic products, and working environment demand is neat.

(2) The addition rate is at 1-6%, depending on the specific product demand.

(3) It is used in thermal polyolefine, like HDPE, LDPE, LLDPE, PP etc. 

(4) It’s apply to middle and low-end requirements of the process such as injection, extruding, pelletizing, blow, pipe, drawing etc.

Food grade masterbatch can be used for food-contact package or products.

                   Specially for film products.

 

COLOR MASTERBATCH HD-8605 Suitable for: FILMS, EXTRUSION, INJECTION MOULDING AND THERMOFORMING

Product name: COLOR MASTERBATCH HD-8605
Suitable product for: FILMS, EXTRUSION, INJECTION MOULDING AND THERMOFORMING.
Suggested let down ratio: 10% - 50%
Observation: the masterbatch dosage is according to the final product requriements.
CHARACTERISTIC	STANDARD	VALUE
Melt Flow Index	GB3682-83	≤ (MI230°C)38-45%10min
Tinting Strength	GB1648-92	95-105%
Chromatic Aberration(CIELAB)	GB3979, GB7921-87	≤4
Heat Resistance	GB1648-92	≥4
Light Resistance	GB250-84	≥4
Migration Resistance	GB250-84	5
Water content	GB1648-92	≤0.15
Dispersion	GB/T 21868-2008, GB/T 21867-2008, GB1648-92	spread evenly
Physical Form	GB1648-92	uniform pellet free from contamination
Appearance: cylindrical pellets,smooth surface,uniform colour.

product application:

Photo of factory

Masterbatch for PP Spunbonded Nonwoven Fabric